Caring for your Tala lighting ensures it continues to brighten your spaces beautifully for years to come. Our high-quality bulbs and fixtures are designed to stand the test of time, and with a little care, you can keep them looking and performing their best. Please retain all product information and instructions for the lifespan of the product.
- Always turn off power at the mains and allow the bulb or fixture to cool fully before commencing maintenance.
-
We recommend the installation of all hardwired fixtures to be performed by a qualified electrician and following all necessary health and safety standards. All fittings must be installed in accordance with appropriate Building and Wiring Regulations
- Do not pull or expose the fixture cable with excessive force.
- Regularly clean the fixture with a feather duster or lint-free cloth to avoid dust build-up. Remove the bulb from the fixture, handle with gloves to prevent oil transfer, and avoid using solvents, abrasives, water, or vigorous rubbing to protect the surface.
- Do not place fixtures in conditions where they will be exposed to moisture levels exceeding their IP rating. See our guide to IP Ratings here.
- Do not over-tighten the bulb to the fixture and make sure to allow a small amount of flex.
- Once the bulb is installed in the fixture, check it is secure before turning the power on.
If you have any questions about caring for your Tala products, don’t hesitate to reach out—we’re always happy to help. You can email us at
hello@talalighting.com.
Please note: Tala does not take responsibility for damage to any part of the product or installation if the instructions above are not followed.
